Power + Status - Onewheel // Future Motion

[GT S-Series Rally XL\ \
GT S-Series
GT
XR Classic
Pint S
Pint X
Pint
Compare
AI Board Finder

25 mph top speed

18-28 mile range

From $3,500

The Pinnacle of Onewheel Performance

25 mph top speed

16-25 mile range

From $2,900

Factory upgraded for next-level performance

20 mph top speed

20-32 mile range

From ~~$2,300~~ $2,000

Maximum range. Tackle the city or slay the trail.

20 mph top speed

17-24 mile range

From $1,900

Classic Looks & State-of-the-Art Performance, Perfect Size.

20 mph top speed

12-18 mile range

From $1,400

18 mph top speed

12-18 mile range

From ~~$1,300~~ $1,100

Compact. Capable. Twice the range & more speed.

16 mph top speed

6-8 mile range

From ~~$1,050~~ $750

The micro-shredder that’s loved by all

Power + Status

Main Power Push Button Switch

Onewheel+ is powered ON and OFF by the pushbutton switch on the side of the Onewheel+. Always make sure your Onewheel+ is on the ground in the ready-to-ride position before switching it “ON.” Always turn your Onewheel+ “OFF” when charging, storing or carrying it.

WARNING: Never pick up your Onewheel+ when the switch is in the “ON” position since the wheel may spin, thus causing a safety hazard.

CAUTION: Do not press the rider-detection area section of the footpad while powering on your Onewheel+ or it will not operate.

TIP Turning on your Onewheel+ while it is not on the ground will cause an error.

Status Indicator

LED STATUS RING INDICATOR The LED ring on the pushbutton switch is the only status indicator for Onewheel+. The LED will indicate battery status and error codes for your Onewheel+.

Normal Operation The LED Status Indicator will pulse slowly under normal operating conditions.

Battery Status As the battery capacity diminishes your ride, the LED Status Indicator will change its rate of pulsing so that the LED Status Ring indicator will remain off longer than it is on. This ratio of ON/OFF time indicates the current battery status. You can also check your battery status from the home screen of the Onewheel app.

Decoding Your Onewheel+

The different blink codes, differentiated by the number of blinks in a row, may indicate different issues with your Onewheel+. Always count the blink code if one occurs. Sometimes you can solve the issue by charging the battery or by switching your Onewheel+ OFF and then ON again. If you are still experiencing problems, please contact Onewheel+ customer support at 1-800-283-7943 or send an email to support@onewheel.com


# OF BLINKS	DESCRIPTION
01,02	Low Battery
03	Overcharge
04	Invalid Power-up Orientation
06	Motor Stall Detected
07	Over-temperature Controller
09	Bad Accelerometer
10	Bad Controller
11	Bad Hall Sensors
13,14	Over-current Detected
17	Over-temperature Battery
18	Over-temperature Motor

Onewheel: How to Power On - YouTube

Tap to unmute

Onewheel: How to Power On Onewheel

Onewheel130K subscribers

Buy Now

\ $2,900](/content/products/onewheel-gt-s-series/index.html)

$1,900

onewheel.com

onewheel.com is blocked